Hybrid Additive Manufacturing and Overmolding of Polymer/Metal Lattices for Efficient Cooling Systems for Waterpower Applications
This proposal addresses the Water for Energy challenge by developing advanced hybrid thermal management structures that can reduce water consumption by 15-25% in cooling processes for power generation, energy storage, and power electronics. Further reductions are possible through hybrid or dry cooling integration. The approach integrates additive-manufactured (AM) metal lattices with polymer composite overmolding to enhance heat transfer efficiency while enabling scalable system integration. This strategy aligns with Pillar No. 4 to increase safe and productive use of nontraditional water sources, addressing the water-energy nexus.
Existing Challenge: Energy systems, including water-cooled housings, manifolds, and internal flow components in steam condensers, power electronics, and battery modules, rely on water-based cooling for high heat loads. Solid metal plates develop thermal hotspots and require significant water. AM metal lattices offer high surface area and rapid conduction but are mechanically fragile, difficult to seal, electrically conductive, and prone to corrosion. Current solutions either fully encapsulate lattices in low-conductivity materials, sacrificing thermal performance, or expose bare metal without structural integration. Designs are rarely optimized using advanced modeling or topology optimization, limiting performance gains. There is no scalable manufacturing approach combining high-efficiency lattices with durable integration suitable for energy-sector deployment. Increasing water scarcity and AI-driven heat generation underscore the urgency of scalable, water-efficient thermal management technologies.
Near-Term Opportunity (3-5 Years): A scalable solution can be achieved using hybrid AM with polymer composite overmolding and modular ultrasonic welding-based assembly. The metal lattice acts as a high-conductivity thermal core, while polymer composite is overmolded on non-thermal regions to provide support and integration features without obstructing heat transfer. Side overmolding offers structural reinforcement, sealing, electrical insulation, and modular interfaces. Modules can be stacked or arranged in series/parallel to scale capacity. Ultrasonic welding provides rapid, high-strength, solvent-free bonding with minimal thermal damage, enabling leak-tight and mechanically stable connections. The polymer overmolding would include thermally conductive fillers (e.g., boron nitride, aluminum oxide, graphite) achieving 2-10 W/mK. Improved conduction and heat spreading allow operation at higher coolant temperatures, making hybrid or dry cooling viable. Advanced multiphysics modeling and topology optimization guide lattice geometry, channel flow paths, and overmolding layouts, reducing prototyping and accelerating scale-up. The resulting modular platform reduces coolant flow, supports ultrasonic welded assembly, operates at higher temperatures, and enables transition from evaporative to hybrid or dry cooling, significantly lowering water consumption.
Key Partnerships: Oak Ridge National Laboratory for lattice and composite development, Ultrasonic welding OEM for automated module joining, Industry partners for system integration and deployment, Utilities for pilot testing, Polymer and filler suppliers for high-conductivity formulations
Success Measures:
-Thermal and Water: Greater than or equal to a 30-50% reduction in coolant flow, greater than or equal to a 35% reduction in evaporative water use, greater than or equal to a 2x heat transfer improvement, and greater than or equal to a 2-4x reduction in thermal resistance.
-Modeling and Design: Greater than or equal to a 20% improvement from topology optimization, 85-90% correlation of simulation to experiment, greater than or equal to a 50% reduction in physical prototyping.
-Manufacturability: Successful lattice-overmold fabrication, durability under thermal cycling, vibration, and corrosion, integration into existing systems.
-Scalability and Impact: TEA confirms high-volume feasibility, pilot deployment in power and energy systems, pathway to water-efficient, high-performance thermal management
Citation Formats
TY - DATA
AB - This proposal addresses the Water for Energy challenge by developing advanced hybrid thermal management structures that can reduce water consumption by 15-25% in cooling processes for power generation, energy storage, and power electronics. Further reductions are possible through hybrid or dry cooling integration. The approach integrates additive-manufactured (AM) metal lattices with polymer composite overmolding to enhance heat transfer efficiency while enabling scalable system integration. This strategy aligns with Pillar No. 4 to increase safe and productive use of nontraditional water sources, addressing the water-energy nexus.
Existing Challenge: Energy systems, including water-cooled housings, manifolds, and internal flow components in steam condensers, power electronics, and battery modules, rely on water-based cooling for high heat loads. Solid metal plates develop thermal hotspots and require significant water. AM metal lattices offer high surface area and rapid conduction but are mechanically fragile, difficult to seal, electrically conductive, and prone to corrosion. Current solutions either fully encapsulate lattices in low-conductivity materials, sacrificing thermal performance, or expose bare metal without structural integration. Designs are rarely optimized using advanced modeling or topology optimization, limiting performance gains. There is no scalable manufacturing approach combining high-efficiency lattices with durable integration suitable for energy-sector deployment. Increasing water scarcity and AI-driven heat generation underscore the urgency of scalable, water-efficient thermal management technologies.
Near-Term Opportunity (3-5 Years): A scalable solution can be achieved using hybrid AM with polymer composite overmolding and modular ultrasonic welding-based assembly. The metal lattice acts as a high-conductivity thermal core, while polymer composite is overmolded on non-thermal regions to provide support and integration features without obstructing heat transfer. Side overmolding offers structural reinforcement, sealing, electrical insulation, and modular interfaces. Modules can be stacked or arranged in series/parallel to scale capacity. Ultrasonic welding provides rapid, high-strength, solvent-free bonding with minimal thermal damage, enabling leak-tight and mechanically stable connections. The polymer overmolding would include thermally conductive fillers (e.g., boron nitride, aluminum oxide, graphite) achieving 2-10 W/mK. Improved conduction and heat spreading allow operation at higher coolant temperatures, making hybrid or dry cooling viable. Advanced multiphysics modeling and topology optimization guide lattice geometry, channel flow paths, and overmolding layouts, reducing prototyping and accelerating scale-up. The resulting modular platform reduces coolant flow, supports ultrasonic welded assembly, operates at higher temperatures, and enables transition from evaporative to hybrid or dry cooling, significantly lowering water consumption.
Key Partnerships: Oak Ridge National Laboratory for lattice and composite development, Ultrasonic welding OEM for automated module joining, Industry partners for system integration and deployment, Utilities for pilot testing, Polymer and filler suppliers for high-conductivity formulations
Success Measures:
-Thermal and Water: Greater than or equal to a 30-50% reduction in coolant flow, greater than or equal to a 35% reduction in evaporative water use, greater than or equal to a 2x heat transfer improvement, and greater than or equal to a 2-4x reduction in thermal resistance.
-Modeling and Design: Greater than or equal to a 20% improvement from topology optimization, 85-90% correlation of simulation to experiment, greater than or equal to a 50% reduction in physical prototyping.
-Manufacturability: Successful lattice-overmold fabrication, durability under thermal cycling, vibration, and corrosion, integration into existing systems.
-Scalability and Impact: TEA confirms high-volume feasibility, pilot deployment in power and energy systems, pathway to water-efficient, high-performance thermal management
AU - Talabi, Segun Isaac
A2 - Nawaz, Kashif
A3 - Kumar, Vipin
A4 - Hassen, Ahmed Arabi
DB - Energy-Water Resilience
DP - Open EI | National Laboratory of the Rockies
DO -
KW - Hybrid Manufacturing
KW - Additive Manufacturing
KW - Polymer Composite Overmolding Technology
KW - Thermal Management
KW - Heat Transfer Efficiency
KW - Materials Development
KW - Energy Systems
KW - High Heat Flux Cooling
KW - Multiphysics Simulation
KW - Topology Optimization
KW - Modular Cooling Design
KW - water energy challenge
KW - hybrid thermal management structures
KW - water consumption
KW - cooling processes
KW - power generation
KW - energy storage
KW - power electronics
LA - English
DA - 2026/01/15
PY - 2026
PB - ORNL
T1 - Hybrid Additive Manufacturing and Overmolding of Polymer/Metal Lattices for Efficient Cooling Systems for Waterpower Applications
UR - https://ewr.openei.org/submissions/110
ER -
Talabi, Segun Isaac, et al. Hybrid Additive Manufacturing and Overmolding of Polymer/Metal Lattices for Efficient Cooling Systems for Waterpower Applications. ORNL, 15 January, 2026, Energy-Water Resilience. https://ewr.openei.org/submissions/110.
Talabi, S., Nawaz, K., Kumar, V., & Hassen, A. (2026). Hybrid Additive Manufacturing and Overmolding of Polymer/Metal Lattices for Efficient Cooling Systems for Waterpower Applications. [Data set]. Energy-Water Resilience. ORNL. https://ewr.openei.org/submissions/110
Talabi, Segun Isaac, Kashif Nawaz, Vipin Kumar, and Ahmed Arabi Hassen. Hybrid Additive Manufacturing and Overmolding of Polymer/Metal Lattices for Efficient Cooling Systems for Waterpower Applications. ORNL, January, 15, 2026. Distributed by Energy-Water Resilience. https://ewr.openei.org/submissions/110
@misc{EWR_Dataset_110,
title = {Hybrid Additive Manufacturing and Overmolding of Polymer/Metal Lattices for Efficient Cooling Systems for Waterpower Applications},
author = {Talabi, Segun Isaac and Nawaz, Kashif and Kumar, Vipin and Hassen, Ahmed Arabi},
abstractNote = {This proposal addresses the Water for Energy challenge by developing advanced hybrid thermal management structures that can reduce water consumption by 15-25\% in cooling processes for power generation, energy storage, and power electronics. Further reductions are possible through hybrid or dry cooling integration. The approach integrates additive-manufactured (AM) metal lattices with polymer composite overmolding to enhance heat transfer efficiency while enabling scalable system integration. This strategy aligns with Pillar No. 4 to increase safe and productive use of nontraditional water sources, addressing the water-energy nexus.
Existing Challenge: Energy systems, including water-cooled housings, manifolds, and internal flow components in steam condensers, power electronics, and battery modules, rely on water-based cooling for high heat loads. Solid metal plates develop thermal hotspots and require significant water. AM metal lattices offer high surface area and rapid conduction but are mechanically fragile, difficult to seal, electrically conductive, and prone to corrosion. Current solutions either fully encapsulate lattices in low-conductivity materials, sacrificing thermal performance, or expose bare metal without structural integration. Designs are rarely optimized using advanced modeling or topology optimization, limiting performance gains. There is no scalable manufacturing approach combining high-efficiency lattices with durable integration suitable for energy-sector deployment. Increasing water scarcity and AI-driven heat generation underscore the urgency of scalable, water-efficient thermal management technologies.
Near-Term Opportunity (3-5 Years): A scalable solution can be achieved using hybrid AM with polymer composite overmolding and modular ultrasonic welding-based assembly. The metal lattice acts as a high-conductivity thermal core, while polymer composite is overmolded on non-thermal regions to provide support and integration features without obstructing heat transfer. Side overmolding offers structural reinforcement, sealing, electrical insulation, and modular interfaces. Modules can be stacked or arranged in series/parallel to scale capacity. Ultrasonic welding provides rapid, high-strength, solvent-free bonding with minimal thermal damage, enabling leak-tight and mechanically stable connections. The polymer overmolding would include thermally conductive fillers (e.g., boron nitride, aluminum oxide, graphite) achieving 2-10 W/mK. Improved conduction and heat spreading allow operation at higher coolant temperatures, making hybrid or dry cooling viable. Advanced multiphysics modeling and topology optimization guide lattice geometry, channel flow paths, and overmolding layouts, reducing prototyping and accelerating scale-up. The resulting modular platform reduces coolant flow, supports ultrasonic welded assembly, operates at higher temperatures, and enables transition from evaporative to hybrid or dry cooling, significantly lowering water consumption.
Key Partnerships: Oak Ridge National Laboratory for lattice and composite development, Ultrasonic welding OEM for automated module joining, Industry partners for system integration and deployment, Utilities for pilot testing, Polymer and filler suppliers for high-conductivity formulations
Success Measures:
-Thermal and Water: Greater than or equal to a 30-50\% reduction in coolant flow, greater than or equal to a 35\% reduction in evaporative water use, greater than or equal to a 2x heat transfer improvement, and greater than or equal to a 2-4x reduction in thermal resistance.
-Modeling and Design: Greater than or equal to a 20\% improvement from topology optimization, 85-90\% correlation of simulation to experiment, greater than or equal to a 50\% reduction in physical prototyping.
-Manufacturability: Successful lattice-overmold fabrication, durability under thermal cycling, vibration, and corrosion, integration into existing systems.
-Scalability and Impact: TEA confirms high-volume feasibility, pilot deployment in power and energy systems, pathway to water-efficient, high-performance thermal management},
url = {https://ewr.openei.org/submissions/110},
year = {2026},
howpublished = {Energy-Water Resilience, ORNL, https://ewr.openei.org/submissions/110},
note = {Accessed: 2026-11-16}
}
Details
Data from Jan 15, 2026
Last updated Jan 15, 2026
Submitted Jan 15, 2026
Contact
Segun Isaac Talabi
Authors
Keywords
Hybrid Manufacturing, Additive Manufacturing, Polymer Composite Overmolding Technology, Thermal Management, Heat Transfer Efficiency, Materials Development, Energy Systems, High Heat Flux Cooling, Multiphysics Simulation, Topology Optimization, Modular Cooling Design, water energy challenge, hybrid thermal management structures, water consumption, cooling processes, power generation, energy storage, power electronicsDOE Project Details
Project Name White Papers on Ideas to Advance Energy-Water Resilience
Project Lead
Project Number WP-110
