Distributed Pumped Hydro for Sustainable Energy-Water Resilience with Vertical Agriculture
This white paper focuses on water for energy and energy for water and food security.
Pumped Hydro energy storage systems have been utilized for over 100 years to offer many advantages to grid management including long life, high efficiency, low maintenance, dispatchable electricity source, and low requirements for natural resources such as critical mineral compared to battery banks. The challenge today is that developers still tend to propose large conventional systems (i.e., 2000 MW with 50+ hrs of release) to market lower costs per nameplate power and energy capabilities. However, the construction of these large conventional systems have many risks that prevent them from being built including permitting, water sourcing, long construction periods, financing, local buy-in, and the need for new transmission. Additionally, operational risks of the conventional approach include mismatching renewable generation with energy management/storage due to different seasonal weather patterns from too large a service area, and evaporative/seepage water losses that need to be made up. Therefore, the full potential of pumped hydro is not realized.
To enable distributed pumped hydro energy storage on an industrial scale, we envision designing and building small-scale demonstration projects of vertical agriculture combined with pumped hydro energy storage alone and in combination with other energy production plants/units to illustrate how this approach works and addresses risk concerns for water, energy use and storage, as well as food production with different crops and how it scales up.
Success measures include: 1) Construct one single story building size pumped hydro-vertical agriculture test stand unit with a minimum storage capability of 25 W at 10 hours release. 2) Build at least two small scale pumped hydro-vertical agriculture demonstration units at different locations with minimum storage capability of 25 kW at 10 hours. In both design cases, crop productivity will be at least 50 times higher than traditional farming combined with significant energy operational cost savings (minimum 10-25%) compared to traditional farming, and total evaporation and leakage rates from the pumped hydro-vertical farming units will be shown to be reduced by at least 25% versus an equivalent conventional pumped hydro-traditional farming baseline design case.
Citation Formats
TY - DATA
AB - This white paper focuses on water for energy and energy for water and food security.
Pumped Hydro energy storage systems have been utilized for over 100 years to offer many advantages to grid management including long life, high efficiency, low maintenance, dispatchable electricity source, and low requirements for natural resources such as critical mineral compared to battery banks. The challenge today is that developers still tend to propose large conventional systems (i.e., 2000 MW with 50+ hrs of release) to market lower costs per nameplate power and energy capabilities. However, the construction of these large conventional systems have many risks that prevent them from being built including permitting, water sourcing, long construction periods, financing, local buy-in, and the need for new transmission. Additionally, operational risks of the conventional approach include mismatching renewable generation with energy management/storage due to different seasonal weather patterns from too large a service area, and evaporative/seepage water losses that need to be made up. Therefore, the full potential of pumped hydro is not realized.
To enable distributed pumped hydro energy storage on an industrial scale, we envision designing and building small-scale demonstration projects of vertical agriculture combined with pumped hydro energy storage alone and in combination with other energy production plants/units to illustrate how this approach works and addresses risk concerns for water, energy use and storage, as well as food production with different crops and how it scales up.
Success measures include: 1) Construct one single story building size pumped hydro-vertical agriculture test stand unit with a minimum storage capability of 25 W at 10 hours release. 2) Build at least two small scale pumped hydro-vertical agriculture demonstration units at different locations with minimum storage capability of 25 kW at 10 hours. In both design cases, crop productivity will be at least 50 times higher than traditional farming combined with significant energy operational cost savings (minimum 10-25%) compared to traditional farming, and total evaporation and leakage rates from the pumped hydro-vertical farming units will be shown to be reduced by at least 25% versus an equivalent conventional pumped hydro-traditional farming baseline design case.
AU - Bibeault, Mark L.
A2 - Sevanto, Sanna
A3 - Hanson, David
A4 - Schultz, Richard
A5 - Akil, Abbas
DB - Energy-Water Resilience
DP - Open EI | National Laboratory of the Rockies
DO -
KW - pumped hydro
KW - energy production
KW - technology innovation
KW - energy storage
KW - food scarcity
KW - vertical agriculture
KW - water security
KW - energy resilience
KW - stakeholder collaboration
KW - distributed
KW - sustainable
KW - agriculture
KW - fod security
LA - English
DA - 2026/01/15
PY - 2026
PB - LANL
T1 - Distributed Pumped Hydro for Sustainable Energy-Water Resilience with Vertical Agriculture
UR - https://ewr.openei.org/submissions/13
ER -
Bibeault, Mark L., et al. Distributed Pumped Hydro for Sustainable Energy-Water Resilience with Vertical Agriculture. LANL, 15 January, 2026, Energy-Water Resilience. https://ewr.openei.org/submissions/13.
Bibeault, M., Sevanto, S., Hanson, D., Schultz, R., & Akil, A. (2026). Distributed Pumped Hydro for Sustainable Energy-Water Resilience with Vertical Agriculture. [Data set]. Energy-Water Resilience. LANL. https://ewr.openei.org/submissions/13
Bibeault, Mark L., Sanna Sevanto, David Hanson, Richard Schultz, and Abbas Akil. Distributed Pumped Hydro for Sustainable Energy-Water Resilience with Vertical Agriculture. LANL, January, 15, 2026. Distributed by Energy-Water Resilience. https://ewr.openei.org/submissions/13
@misc{EWR_Dataset_13,
title = {Distributed Pumped Hydro for Sustainable Energy-Water Resilience with Vertical Agriculture},
author = {Bibeault, Mark L. and Sevanto, Sanna and Hanson, David and Schultz, Richard and Akil, Abbas},
abstractNote = {This white paper focuses on water for energy and energy for water and food security.
Pumped Hydro energy storage systems have been utilized for over 100 years to offer many advantages to grid management including long life, high efficiency, low maintenance, dispatchable electricity source, and low requirements for natural resources such as critical mineral compared to battery banks. The challenge today is that developers still tend to propose large conventional systems (i.e., 2000 MW with 50+ hrs of release) to market lower costs per nameplate power and energy capabilities. However, the construction of these large conventional systems have many risks that prevent them from being built including permitting, water sourcing, long construction periods, financing, local buy-in, and the need for new transmission. Additionally, operational risks of the conventional approach include mismatching renewable generation with energy management/storage due to different seasonal weather patterns from too large a service area, and evaporative/seepage water losses that need to be made up. Therefore, the full potential of pumped hydro is not realized.
To enable distributed pumped hydro energy storage on an industrial scale, we envision designing and building small-scale demonstration projects of vertical agriculture combined with pumped hydro energy storage alone and in combination with other energy production plants/units to illustrate how this approach works and addresses risk concerns for water, energy use and storage, as well as food production with different crops and how it scales up.
Success measures include: 1) Construct one single story building size pumped hydro-vertical agriculture test stand unit with a minimum storage capability of 25 W at 10 hours release. 2) Build at least two small scale pumped hydro-vertical agriculture demonstration units at different locations with minimum storage capability of 25 kW at 10 hours. In both design cases, crop productivity will be at least 50 times higher than traditional farming combined with significant energy operational cost savings (minimum 10-25\%) compared to traditional farming, and total evaporation and leakage rates from the pumped hydro-vertical farming units will be shown to be reduced by at least 25\% versus an equivalent conventional pumped hydro-traditional farming baseline design case.
},
url = {https://ewr.openei.org/submissions/13},
year = {2026},
howpublished = {Energy-Water Resilience, LANL, https://ewr.openei.org/submissions/13},
note = {Accessed: 2026-11-16}
}
Details
Data from Jan 15, 2026
Last updated Jan 16, 2026
Submitted Jan 15, 2026
Contact
Mark Bibeault
Authors
Keywords
pumped hydro, energy production, technology innovation, energy storage, food scarcity, vertical agriculture, water security, energy resilience, stakeholder collaboration, distributed, sustainable, agriculture, fod securityDOE Project Details
Project Name White Papers on Ideas to Advance Energy-Water Resilience
Project Lead
Project Number WP-013
